|Organization||Hewlett-Packard (formerly Compaq)|
|Product Identification||Version/Release Number||Product Supplier|
|1.||HP Tru64 UNIX||Version 5.1A or later||Hewlett-Packard|
|Testing Environment||Binary-compatible Family||Portability Environment||Indicator of Compliance||Compliance Details|
||Internationalised System Calls and Libraries Extended v2||Test Report from Test Suite||Test Suite:
Test Report: compaq-vst5-vrpt/journal.z
Question 1: Which service types and transport providers are supported by the product and what transport provider identifiers are used to access them?
|Service Type||Supported||Transport Provider Identifier(s)|
Description of transport providers:
Question 2: Does the product support negotiation of the following Quality of Service options?
|QoS Parameter||XTI Name||Negotiation Supported|
|Residual Error Rate||T_TCO_RESERRORRATE|
|Transfer Failure Probability||T_TCO_TRANSFAILPROB|
|Connection Establishment Failure Probability||T_TCO_ESTFAILPROB|
|Connection Release Failure Probability||T_TCO_RELFAILPROB|
|Connection Establishment Delay||T_TCO_ESTDELAY|
|Connection Release Delay||T_TCO_RELDELAY|
|Connection Resilience Protection||T_TCO_PROTECTION|
Question 3: Which of the following XTI management options are supported by the product?
|Maximum Length of TPDU||T_TCO_LTPDU|
|1st Alternate Class||T_TCO_ALTCLASS1|
|2nd Alternate Class||T_TCO_ALTCLASS2|
|3rd Alternate Class||T_TCO_ALTCLASS3|
|4th Alternate Class||T_TCO_ALTCLASS4|
|Network Expedited Data||T_TCO_NETEXP|
|Network Receipt Confirmation||T_TCO_NETRECPTCF|
Question 4: Which of the following Quality of Service parameters are supported by the XTI product when an ISO Connectionless Mode transport service is used as the service provider?
|QoS Parameter||XTI Name||Supported|
|Residual Error Rate||T_TCL_RESERRORRATE|
Question 5: Does the product support the use of the T_TCL_CHECKSUM management option to allow user control over whether a checksum is computed for PDUs issued by an ISO Connectionless Mode transport provider?
Question 6: Which of the following options are supported for use with TCP transport providers?
|Check Connections Alive||T_TCP_KEEPALIVE||Yes|
|Get Maximum Segment Size||T_TCP_MAXSEG||Yes|
|Don't Delay To Coalesce||T_TCP_NODELAY||Yes|
Question 7: Does the product support user control of the computation of UDP checksums by means of the T_UDP_CHECKSUM option?
Question 8: Which of the following options are supported at the IP-level by the transport provider(s) associated with the XTI product?
|IP Per-Packet Options||T_IP_OPTIONS||Yes|
|Local Address Reuse||T_IP_REUSEADDR||Yes|
|IP Type Of Service||T_IP_TOS||Yes|
|Time To Live||T_IP_TTL||Yes|
Question 9: Which protocol stacks does the product support?
|ISO ISP 10608-2 (TA-51)||TP4 and CLNS over LLC1 and 8802-3 LAN.||No|
|ISO ISP 10608-5 (TA 1111)||TP4 and CLNS over PSTN SVC.||No|
|ISO ISP 10609-6 (TC 1111)||TP0,2 and CONS over PSTN SVC.||No|
|ISO ISP 10609-7 (TD 1111)||TP0 and CONS over PSTN SVC.||No|
Question 10: What other protocols or protocol profiles does your product support?
Question 11: Does your implementation use all the recommended values identified in the XTI specification as "recommended only, not mandatory for conformance"?
Copyright © 2001 Compaq Computer Corporation
All rights reserved.
|12-Oct-2006||Certification Authority||Change of vendor name from Compaq Computer Corp to Hewlett-Packard Company|
|19-Feb-2001||Bonnie Talerico||UNIX 98|
The Open Group and Boundaryless Information Flow are trademarks and UNIX is a registered trademark of The Open Group in the United States and other countries. All other trademarks are the property of their respective owners.